Teambreak

cover

plate_1.png

Angelol

Immagine WhatsApp 2024-02-09 ore 18.20.52_3df7385e_d3a7e6af-8e79-4e68-b23a-5ab816a28f97.webp

Immagine WhatsApp 2024-02-09 ore 18.21.01_42d80e91_b186b27f-57cb-423e-a89f-3287f66961ba.webp

plate_1.png;filename*=utf-8''plate_1.webp

Only 5 hours!!!&nbsp;Lighting infill is the best way for this type of print, NO support needed.&nbsp;Resize the model if you want.

0.2mm layer, 2 walls, 5% infill

Maxy

IMG_20241106_145915.jpg

IMG_20241106_150003.jpg

IMG_20241106_111024.jpg

IMG_20241106_150025.jpg

<ul><li>Slightly adjusted from other profiles here</li><li>0.08mm layer height for max. quality, adaptive (doesnt have much impact on such a complex model)</li><li>Size adjusted to the maximum of the A1 Mini Printspace</li><li>Printed with cheap no name PLA filament and default generic PLA Settings</li><li>Slightly more infill to have shorter overhangs at the shoulder/head. &nbsp;Downside is you can clearly see the infill if you place it in front of a direct light source (at least with my bright filament color). If you place it against a wall and only have light shining on it and not through it, its no problem as you can see in my pictures.</li><li>Supports are activated but not used</li></ul>Even without digging deeper into the settings, the quality and details came out superb. So if you arent in a rush, using this low layer height and letting it print over night really pays of.&nbsp;Was a Gift for my Mother and well, I think compared to real statues it looks as good as a single colored plastic piece can look.&nbsp;&nbsp;

0.08mm, 2 walls, 10% infill - Max. A1 Mini Size + Quality

Original model is by: <a target="_blank" href="https://www.thingiverse.com/yaddatrance" rel="nofollow noopener">yaddatrance</a> https://www.thingiverse.com/thing:2371630

Hires Buddha

ASIA

Print Profile(2)

Description

Comment & Rating (83)

License

Related Models