Portsmouth Vintage travel poster - hueforge
Print Profile(1)
Bill of Materials
Description
My photos are indeed those of the printed model and not of the original image
-------------------------------------------------------------------------------------------------------------------------------------------------------
Commercial license and exclusive models on Ko-fi!
Thanks!
-------------------------------------------------------------------------------------------------------------------------------------------------------
Hueforge of a vintage travel poster "Portsmouth and Southsea go by train" (by Laurence Fish, 1962)
The photos shows the result in 127.54x200mm and a nozzle of 0.4
Boost Me (for free)
Thanks for your boost!
You can change the X and Y dimensions but do not change the Z dimensions
You must define the printing parameters indicated in the description below and change the filament on the indicated layers.
You can use filaments other than those indicated, but the result will differ.
You can use any black PLA
Hueforge description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 127.54x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.1mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Matte Ice Blue Transmission Distance: 3.5
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Sunflower Yellow Transmission Distance: 4.5
This print uses 6 unique filaments
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Blue Gray
At layer #8 (0.72mm) swap to Jade White
At layer #9 (0.8mm) swap to Ice Blue
At layer #10 (0.88mm) swap to Red
At layer #15 (1.28mm) swap to Sunflower Yellow
At layer #19 (1.6mm) swap to Jade White for the rest.
-------------------------------------------------------------------------------------------------------------------------------------------------------
Don't forget your grandma's advice: Always have a clean plate, a dry and calibrate filament, and make an offering to the god of 3D printing from time to time.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)