1U Open Shelf for 10" Rack - Free 3D Print Model

Search models, users, collections, and posts

mklements

Hobby & DIY>Electronics

IP Report

Print Profile(1)

All

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

5.7 h

2 plates

5.0(62)

Open in Bambu Studio

Boost

265

986

2.3 k

698

Released

Description

An open shelf to mount a mini PC, switch or NAS into a 10" rack. This shelf is specifically designed to fit the depth of the Lab Rax system with rear supports. You'll need to use two M6x10mm screws and nuts to secure the shelf to the supports.

Shown in the image is the Lincstation N1 which fits well on the shelf in a 10" rack.

Comment & Rating (78)

@moddok

Print Profile

0.2mm layer, 2 walls, 15% infill

10/10!!

@Itsigo

Which rpi mount are you using there in the bottom right?

@PeterJohnson

Print Profile

0.2mm layer, 2 walls, 15% infill

Came out great, nice fit and seems good and strong

@user_385572945

Can’t print from the app due to no P1S profile apparently.

@makerjj

yeah why is it that we cant print this on P1S? But A1 can print this?!

@smithdws

Replying to @makerjj :

The no print zone in the front left corner...?

@makerjj

Replying to @smithdws :

this is the reason why some models doesnt have a P1S profile because of this! However, you can make modifications in Studio and slice it and send it. https://wiki.bambulab.com/en/knowledge-sharing/print-volume-limitations

@alexkill536ITA

I created a ventilated version that follows the style used in the other parts https://makerworld.com/it/models/1414106-1u-ventilated-open-shelf-for-10-rack#profileId-1468382

@CyberGWJ

I printed this for my rack and it works well. A question, would it be possible to put vent slots in shelf for airflow vertically? I am planning on putting a fan at the bottom and top to pull air through the rack. The shelf would block a lot it. Didn't know if it is a strength issue. Thanks for the great rack!

(Edited)

@milkham

Can you make a version with vent holes through the shelf? I would like to have more ventilation

@CyberGWJ

I create my first remix of a model. I added slots to the original and created one for a Intel NUC needed more room on the sides. Let me know if this works for you. https://makerworld.com/en/models/1357259-lab-rax-1u-shelf-with-slots#profileId-1401156

@prophetonyx

is there a reason the p1s isnt listed as compatible?

@user_1521069736

would you have a version of a shelve for 2U and 1.5U as well. since you have the frontplates in f360 already I guess this may be fairly straightforward? Tnx!

@rosch

Have you or has someone here experimented with a shelf like this, having a panel in front? I could imagine to make the shelf mounts 1.5mm to be able to print 1.5mm front panels for it and screw & glue them together. Just to have the same structured surface. Does it make sense? Can try to remix if I may.