Stackable Nail Polish Organizer Crate

A stackable nail polish crate that fits 8 standard-sized nail polishes, ranging from 10-15 mL. The distance between the center divider and the outer wall is 28.5 mm, for your info.

Print Settings

There are two ways to print this model:

1. Print as one piece – import the 3mf file as a single object into your slicer and print as-is. The only catch here is that the handle has an approximately 100 mm bridge, which could lead to a poor finish depending on your printer and/or filament. If your printer and filament are turned in, give this method a try.
2. Print the handle flat on the build plate ahead of time. Then, while printing the main piece, add a pause at layer 481 (assuming 0.2 mm layer height) to insert the handle.