OpenRC Cultivator with roller
Print Profile(2)
Description
I revised and improved the normal size cultivator by adding a new roller like his big brother the XL. It turned out great but it is quite heavy, so normal cheap micro servos won't be able to lift it.
So, if you print it without rear roller it will work with both MK2.4 and MK3. If you want the roller, It's strongly recommended that you print the linear actuator mod for the MK3.
Instructions
It's not difficult to assemble, just take a look at the pictures and assembly guide for the roller. You can always ask on the comments if you have any problem.
Materials
Check BOM spreadsheet
Remember that you can support my work with Boosts, downloads or with a coffee or a tip!
Update 15-06-2025: Added a two part body for smaller printers
Documentation (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (12)