Scale Workbench with Functional Drawers "60x120"
Print Profile(1)
Description
🟧 "Bench Boss – 60x120" – Scaled Workbench with Functional Drawers
Scale Conversion Guide – Adjusting this 1:10 & 1:18 model to other scales at the bottom!
🔗 Check out my other to scale designs: Scale Collection
Even tiny garages deserve a solid workbench! 🛠️
🧩 This compact 60x120 cm bench (in scale, of course!) brings both structure and functionality to your miniature workshop.
Designed with working drawers and a clean, realistic silhouette, it fits perfectly with my other garage accessories like the Pallet Jack, Car Ramp, and Tire Rack.
(the model didnt look as good as it could, i had a glue mishap etc :/ )
📢 Available in both 1:10 and 1:18, and fully functional in both scales!
This version was refined to balance detail and printability—especially in the tiny 1:18 format. The drawers really open, and the design prints cleanly without supports when laid flat.
🔧 Functionality & Printing Tips
✔ Working drawers – small but usable
✔ No supports needed if printed flat
✔ Best results on a smooth plate
✔ PLA recommended, PETG/ASA also possible
❗ Legs must be glued – filament bits act as guides but won’t hold on their own
🛠️ Note: Even if the model worked perfectly on my end and looks flawless in the photos—remember, this is 3D printing 😄
Printers, settings, and materials vary, so a bit of post-processing might be needed.
Holes might come out slightly undersized, so it’s often a good idea to have a small drill bit handy in the desired diameter.
Light sanding, trimming, or gluing may also be needed depending on your setup. Totally normal!
📦 Build Notes 🪛
✔ Filament bits used as alignment pins
✔ Legs need to be glued on for stability
✔ Designed to print flat with no supports
✔ Fully printable in 1:10 and 1:18
✔ Scaleable – see below for exact ratios 👇
📄 Assembly Guide
Simple build—just insert, align, and glue. A one-pager guide will follow soon.
📏 Scale Conversion Guide – Adjusting This 1:10 Model to Other Scales
| Target Scale | Conversion Factor | Scale % |
|---|---|---|
| 1:5 | 2.0 | 200% |
| 1:8 | 1.25 | 125% |
| 1:12 | 0.8333 | 83.33% |
| 1:14 | 0.7143 | 71.43% |
| 1:16 | 0.625 | 62.5% |
| 1:18 | 0.5556 | 55.56% |
| 1:24 | 0.4167 | 41.67% |
| 1:35 | 0.2857 | 28.57% |
| 1:48 | 0.2083 | 20.83% |
💡 Example: Want to scale 1:10 to 1:14? Multiply by 0.7143.
100 mm × 0.7143 = 71.43 mm
📏 Scaling Warning!
🔹 Small details may need a 0.2 mm nozzle when scaling down
🔹 Wall thickness can get fragile in small scales
🔹 Pegs and drawer clearances may need tuning depending on slicer/printer
🚀 Want More? I’m Just Getting Started!
Follow along on my journey, drop a like, and stay tuned for more. Always working on new ideas!
📢 Feedback & Requests
Need a deeper version? Wall-mount drawers? Let me know!
🔗 Check out my other designs: JustCallMeDaddy on MakerWorld
📸 Show Off Your Prints!
Paint it, scale it, weather it—I'd love to see your spin on it!
Happy printing! 😊
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (12)