F1 DRS Wing Key Holder Part 1

!! Version 4.0 !!

!! The project is divided into 3 parts, all 3 are on my profile !!

!! the main body and the wing must be hooked and glued together

!! Supports, screws and parts for the wing's operation updated, all parts made more robust, holes enlarged which were previously too small !!

!! A big upgrade will be made soon when I receive my new printer, if you want, support me so I can buy it as quickly as possible !!

!! Download the STL file to get the correct project !!

I designed an F1 keyring wing, and when you get home and hang your keys on the hook, the DRS will open

Very simple to assemble, doesn't take up much space and doesn't use much filament to print

!! I highly recommend using metal/iron/steel fixing screws or whatever material you prefer, as the ones in the file are very small and might not come out in the print, if there are problems with the measurements, let me know and I will modify the project

!! Ferrari DRS photo by @PaulNi on MakerWorld

dimensions:

-for hanging on the wall, it has 5 holes in the back bar, 6mm in diameter each

-all holes have a width of 6mm

-approximately 350mm wide

-approximately 180mm high

-approximately 118mm deep

!! Parts 2 and 3 are on my profile

!! can also be printed with very small printer plates (e.g. Bambu Lab A1 mini)

!! The instructions are above along with the photos, both in Italian and in English !!

!!! IF YOU WANT AND YOU LIKE THE PRINT, PLEASE PUBLISH YOUR PRINT PROFILE, THANK YOU !!!

!!!!! Soon, if I see that the project is appreciated by many people, it will come out with the liveries of the various F1 teams !!!!!

If there are any problems or you want me to create a project for you, write me in the comments

Thanks to everyone who downloads or prints the project