There is a new model of 200X150mm available now, this frame is too big for a naked photo, so I left 1mm space for a transparent plastic or acrylic board.
Now I uploaded a new model for a 5"x7" photo. Because the photo's paper of such size or above is easy to wrinkle, so I didn't upload it before. Now someone said maybe we can fix the issue by adding a transparent plastic or acrylic board, so I modified the model.
There are 2 types of the frame models, if the transparent plastic or acrylic board's thickness is 2mm, please download the “PhotoFrame5x7-1-2mm”, IF 1mm, try"PhotoFrame5x7-1-1mm".
A light and thin 3D print Photo Frame that can be mounted on the wall or placed on the table.
All parts can be printed without support, 30% infill is recommended for the body, and 60-80% infill for the stand parts(PhotoFrame-parts.stl).
2 of the photo sizes are available: Kodak 3R(89x127mm) and 4R(102x152mm)
Fit pushpin, pin, screw, and nail on the wall, easy to fix.
Watch the video to get more information:
Enjoy!
See my other designs at:
https://makerworld.com/en/u/2112721175