Stool with toolbox - Free 3D Print Model

Search models, users, collections, and posts

wuguigui

Tools>Other Tools

IP Report

Print Profile(2)

All

P1P

X1E

H2D

X1 Carbon

P1S

H2D Pro

H2S

P2S

H2C

X2D

A2L

Stool with no tool box

Designer

16 h

1 plate

5.0(1)

Stool with tool box

Designer

21 h

2 plates

Open in Bambu Studio

Boost

115

224

157

Released

Description

Boost Me (for free)

Thank you for inspiring me to create more and more lovely models

Summary

Updated 03/02/2023
A new part( stool-rise)that can increase 2cm height of the stool, can also be stacked continuously.
——————————————
A stool with a toolbox, for makers who need to maintain machines on the ground.
Size is 210x210x210mm.
It has 2 versions, stool only and stool with a toolbox. Only the toolbox case and cover need a little support when printing. 0.2 layer height, 1.2mm wall thickness, 25% infill is my print setting, which can get a balance between the strength and the cost of filaments(the stool needs about 900g in this setting). Filaments I use ESUN PLA+.
Watch the video to get more information.
https://youtu.be/mSQgMI4YYv4
enjoy!

Salute to makers!
See my other design at:
https://makerworld.com/en/u/2112721175

Post-Printing

Membership

Thank you for inspiring me to create more and more lovely models

Join

Comment & Rating (5)

@tankxu

@IhorHryniv Why did you upload a print profile with a 0.08mm layer? The profile list only has this one profile from you, so I thought it was the recommended print settings from the original author. After two hours of printing, I observed the machine and realized something was wrong. No wonder it takes a whole day with a 0.08mm layer height; the wall thickness and infill are also completely off. Now I don't know whether to stop and reprint or continue. To those who need to print this model, please download the original model from the author and adjust the settings yourself.