Baltimore Ravens Oversized Pendant and Chain

Baltimore Oversized Pendant and Chain

This pendant is 5 colours.  

It's textured with an inset Cowboys pattern for extra flair.

The pendant has a “female” opening at the top for the chain to lock into.

There are chain options…

The standard chain links…  1 plate full is the perfect amount for a full necklace, but I added 2 plates in case you want to make the links mixed colours.

If choosing the standard chain links, print the connector for the chain links with the “male” insert on plate 3.  This is for locking into the “female” opening at the top of the pendant.

There are 2 variations for the Cuban Chains.  

• A solid ring that is 70cm with the “male” insert attached.
• An open spiral that is 85cm with the “male” insert attached.  This version also has a smaller “male/female” locking connector at the ends of the chain.  NOTE:  There is a small flat support under the “male” connector at the chain end.  This is just for printing support and snaps off.

These connectors are designed to be permeant.  They need a good hard shove to snap in place.  Once they're connected they won't come out.  So be sure that the chain is straight before connecting the ends.

This is pendant is part of a series that I plan on making.  All NFL teams with a unique pattern specific to the team (wings for Eagles, zubaz for Bills, 12th man for Seahawks, etc).  Be sure to stay tuned and check them out as I release them!

I added instructions for printing more than 4 colours with 1 AMS.

Thanks for the support!