Scale WIDE Workbench w/ Drawers & Tool Wall
Print Profile(1)
Description
🟧 "Workbench Pro – 60x180" – Scaled Workbench w/ Drawers & Tool Wall
Scale Conversion Guide – Adjusting this 1:10 & 1:18 model to other scales at the bottom!
🔗 Check out my other to scale designs: Scale Collection
Big bench. Bigger ambitions. Even at 1:18. 🛠️🧰
🧩 This extended 60x180 cm workbench model is designed to be the centerpiece of your scaled garage or diorama.
With working drawers and a tool wall (this should be printed with 0.2 nozzel, tool wall) that mounts to the rear edge, this setup brings both realism and usability into miniature scale.
Pairs beautifully with my other garage items like the Car Ramp, Tire Rack, and Pallet Jack.
📢 Fully printable in 1:10 and 1:18, and yes—the drawers work in both!
The tool wall is optional but adds a lot of detail, and even includes holes that can be drilled or marked to simulate tool pegs.
While the bench prints flat and clean, some assembly is required—but nothing too tricky.
🔧 Functionality & Printing Tips
✔ Functional drawers with smooth slide-out fit
✔ Rear-mounted tool wall gives it that true workshop vibe (this should be printed with 0.2 nozzel)
✔ Prints best flat on a smooth plate
✔ Supports not needed, unless scaling very small
✔ PLA preferred, but PETG/ASA will work too with proper tuning
❗ Legs must be glued, and filament bits used for guiding and alignment
🛠️ Note: Even if the model worked perfectly on my end and looks flawless in the photos—remember, this is 3D printing 😄
Printers, settings, and materials vary, so a bit of post-processing might be needed.
Holes might come out slightly undersized, so keep a small drill bit on hand for cleanup.
Light sanding, trimming, or gluing is often just part of the process.
📦 Build Notes 🪛
✔ Assembly required for legs and back wall
✔ Tool wall slots into the rear of the bench
✔ All parts designed to print without supports
✔ Optimized for PLA
✔ Filament bits work as pins—glue required for strength
✔ Fully printable in 1:10 and 1:18
✔ Can be scaled—see conversion table below 👇
📄 Assembly Guide
Visual one-pager coming soon. For now: lay flat, glue legs, slot in drawers and rear wall—done!
📏 Scale Conversion Guide – Adjusting This 1:18 Model to Other Scales
| Target Scale | Conversion Factor | Scale % |
|---|---|---|
| 1:5 | 3.24 | 324% |
| 1:8 | 2.25 | 225% |
| 1:10 | 1.80 | 180% |
| 1:12 | 1.50 | 150% |
| 1:14 | 1.29 | 129% |
| 1:16 | 1.13 | 113% |
| 1:18 | 1.00 | 100% |
| 1:24 | 0.75 | 75% |
| 1:35 | 0.51 | 51% |
| 1:48 | 0.38 | 38% |
💡 Example: Want to scale this 1:18 model to 1:10?
Multiply by 1.80
→ 100 mm × 1.80 = 180 mm
📏 Scaling Warning!
🔹 Small parts may need a 0.2 mm nozzle in tiny scales
🔹 Pegs and slots may get tighter/looser depending on printer
🔹 Be careful with thin drawer handles if scaling below 1:18
🚀 Want More? I’m Just Getting Started!
I’m building an entire garage collection—tools, racks, furniture, and more. Drop a like, follow along, and print what you need!
📢 Feedback & Requests
Need a bench with shelves? A corner unit? Message me!
🔗 Check out my other designs: JustCallMeDaddy on MakerWorld
📸 Show Off Your Prints!
I'd love to see what you do with it—paint it, mod it, scale it, share it!
Happy printing! 😊
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (15)