holy christ of the sea

Project: holy christ of the sea.hfp Print with 100% infill and a layer height of 0.08 mm, with a 0.16 mm base layer. The model measures 133.3 x 200 mm. You can print with higher layer heights, below the base thickness of 0.48 mm. The maximum allowable thickness is 2.24 mm and the actual thickness is 2.16 mm. Used filaments: #000000 PLA Smart Recycled Black, Transmission distance: 1 #818181 PLA smartfil Dark Gray, Transmission distance: 2.8 #ced3d2 PLA smartfil Cool White, Transmission distance: 1 #ffffff PLA Smart Recycled Coral White, Transmission distance: 7.2 This print uses 4 unique filaments. Change instructions: Begin with black. At layer 11 (0.96 mm), change to dark gray. At layer 16 (1.36 mm), change to cool white. At layer #20 (1.68 mm), change to dark gray. At layer #23 (1.92 mm), change to coral white for the remainder.