Search models, users, collections, and posts
Power brick Ac-adaptor mounting bracket
IP Report
Print Profile(1)
0.2mm Strength, 6 walls, 25% infill
Designer
1.3 h
1 plate
Open in Bambu Studio
Boost
4
18
0
1
6
2
Released
Bill of Materials
List other parts
- Zip Ties or velcro strips x 2: I used velcro strips
- Double-sided tape x 1: The stronger, the better
Description
This mounting bracket can be used on most flat surfaces with many types of Power brick adaptors
I am using mine on a shelf in my server rack.
Materials:
- A heat resistant filament. (like PLA+ or PETG)
- Double-sided tape. (The stronger, the better)
- Zip Ties or velcro strips. (To fasten the adaptor to the bracket)
Assembly and installation:
- Print the bracket and remove its supports
- Tie your Zip Ties or velcro strips to the long holes on the side, as shown in the pictures.
- Add your adaptor and fasten it to the bracket. Make sure the power cable is pointing up.
- Add the double-sided tape to the bracket, as seen in the pictures.
- Place the bracket on a flat surface.
License
This user content is licensed under a
Creative Commons Attribution-NoDerivatives
Comment & Rating (0)