LDS Temple - Salt Lake City, Utah - Free 3D Print Model

Search models, users, collections, and posts

Noah

Miniatures>Architecture

IP Report

Print Profile(1)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 3 walls, 10% infill

Designer

7.5 h

2 plates

4.9(36)

Open in Bambu Studio

Boost

262

613

684

362

Released

Description

The Salt Lake City Temple of the Church of Jesus Christ of Latter Day Saints

I designed this and other temples as gifts for my Seminary students. You can change the bottom text in the slicer, so these could make great gifts for youth, relief society, elders qorum, or anyone who could use a meaningful decoration in their home. No supports are necessary except for the Moroni Statue.

Here are some cool facts about this particular temple.

"Always have the temple in your sights"

latter day saints lds temple

salt lake city temple

Comment & Rating (88)

@Yesi.pena

Print Profile

0.2mm layer, 3 walls, 10% infill

very beautiful design I printed it for my brother-in-law

The profile uploader has replied

Show original

@NJP_design

It turned out wonderful! Thanks for the picture.

@keithbigmac

Print Profile

0.2mm layer, 3 walls, 10% infill

Clogged a .2 nozzle trying to print it in marble, so I switched to a basic pla. Looks pretty good 👍. Removing the supports off moroni was nerve racking 😆

The profile uploader has replied

@NJP_design

The little bit of blue in there looks very nice. Yes, the Moroni is about as tiny as a 0.2 nozzle can manage, I'm glad you stuck to it. Thanks for the picture!

(Edited)

@biggscorey

Boosted

Print Profile

0.2mm layer, 3 walls, 10% infill

didn’t print Moroni, but the temple printed perfectly in marble PLA. lots of detail!

The profile uploader has replied

@NJP_design

That does look very nice. Thanks for sharing a picture.

@MadmansVoid

Boosted

Print Profile

0.2mm layer, 3 walls, 10% infill

Great print! I chose translucent filament. Thanks.

The profile uploader has replied

@NJP_design

Looks amazing! Thanks for sharing a pic. I'm glad you like the model.

@Hankins3D

Print Profile

0.2mm layer, 3 walls, 10% infill

Love the detail on this print. printed at 37% and original size. Thank you for the great file!

The profile uploader has replied

@NJP_design

I don't think that is my model of the SLC temple. It looks great though.

@jefftheCuTiE

i was just wondering, if i was to print this, how would i change the words on the bottom of the temple?

The designer has replied

@NJP_design

Open it in your slicer. Switch to show objects rather than global settings and you can edit the text object that subtracts the text from the bottom.

@jefftheCuTiE

Replying to @NJP_design :

i’m kinda new to 3d printing so could you tell me how to get to the slicer? sorry for the questions btw😅

@NJP_design

Replying to @jefftheCuTiE :

https://bambulab.com/en-us/download/studio

@jessefisco

what are the dimensions? I can’t seem to find them.

The designer has replied

@NJP_design

The slicer shows 70 x 113 with a height of 118 then the Moroni will add about 35 when added on top. I am sure you could scale up or down pretty well as much as you want. The Moroni can't be much smaller, but it could be bigger, and the building itself could be as big or small as you want it.

@jessefisco

Replying to @NJP_design :

thank you! I need to figure out slicing…seems like that’s not possible in the app? probably the computer version?

@NJP_design

Replying to @jessefisco :

There is lots and lots you can do on the computer version. I have never tried doing anything with the app, but assume it's restricting. Good luck.

@korirocks12

love this! any chance you could make one for payson Utah?

The designer has replied

@NJP_design

I'm glad you like it. I will add Payson on my list of ones to make next.

@korirocks12

Replying to @NJP_design :

Thank you! I saw a couple other payson models, but nothing with Maroni on top unfortunately. I love the way you do separate gold spires and Maroni on your models.

@NJP_design

Replying to @korirocks12 :

Thanks!

@jmerchant

Print Profile

0.2mm layer, 3 walls, 10% infill

Moroni’s is trumpet is a bit thin and delicate, other wise great print

The profile uploader has replied

@NJP_design

The Moroni himself is very small and delicate. I spent a lot of time playing with it to improve things. He is already about 4x bigger than the scale, and if I made him any bigger, I thought it looked goofy. I'm glad you liked it otherwise.

@Roundtoit

Replying to @NJP_design :

Noah @NJP_design I just printed this and am absolutely amazed at how much detail you have added. GREAT JOB! I am afraid to touch the supports for Moroni for fear of breaking him but especially the horn off. Any suggestions as to the best way to remove the supports? Cutting, melting, micro grinder?

@NJP_design

Replying to @Roundtoit :

I usually just use my filament cutters to snip around the most delicate parts and then carefully choose the direction to peel the rest of the supports of to not tug on the horn and arm.

@user_3933650835

Print Profile

0.2mm layer, 3 walls, 10% infill

Awesome model

The profile uploader has replied

@NJP_design

Thanks!

@user_4174273172

hey can I sell a few of these to family? just an ask

@user_4174273172

Replying to @user_4174273172 :

just wanna try to add some money to me saving for an ams lite

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.