Articulating Spider - Free 3D Print Model

Search models, users, collections, and posts

Flexi-Maker

Toys & Games>Other Toys & Games

IP Report

GIF

Print Profile(2)

All

P1S

A1 mini

X1E

X1 Carbon

P1P

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

4.6 h

2 plates

5.0(16)

Small colorized spider (AMS) - Scaled down to about 34%

2.7 h

1 plate

4.0(2)

Open in Bambu Studio

Boost

312

606

434

169

Released

Description

This is my fantasy spider, I hope you like it. You can print them without support or edge.
Infill: 15%
Perimeter: 2

That's my cute joint spider that can go in and out of the rope. Let it dangle from the ceiling or add a magnet that can be built into the spider or the web.

I recommend using a string that is 1-3 mm thick. I can't say exactly how much will fit in the spider as it varies with each thickness. I used white yarn that is about 1.5mm thick.

The spider is printed in place. You just have to glue or tie the web separately to the spider's string.

How do I assemble it?

1. Make a knot in the end of the rope.

2. Push the rope into the opening until it comes out at the back.

3. Push it so far that the knot gets stuck in the opening.

4. Now you can stick the knot if it’s too loose for you. First, attach the web to the end of the rope and wrap the rope up.

5. You can now glue a magnet into the web and the spider that is 8x3mm (4x) in size (round or square).

If you want to support me, join my Patreon.
https://www.patreon.com/Flexi__Maker

Comment & Rating (24)

@homedecor

your model is stolen in Creality Cloud

@Shadowrock

i hate it when designs get stolen!! Thanks for bringing this to light, I hope someone has to fess up. 😖

@user_2436125796

Not the same look at the legs

@mweed42

Print Profile

0.2mm layer, 2 walls, 15% infill

Printed perfectly. I painted the eyes and scaled to 60%. Looks amazing! Not sure what the spinning mechanism is for under the abdomen.

@Shadowrock

to put a wind up web inside the spider! 🥳. the instructions are on the main model page.

@user_34244843

:-)

(Edited)

@user_4011218412

Print Profile

0.2mm layer, 2 walls, 15% infill

Cute! Scale 50%

Show original

@zookdar

Print Profile

0.2mm layer, 2 walls, 15% infill

So good my wife immediately asked me to make another one.

@user_396622102

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

i don't know why I didn't think to check size but regardless it turned out great, just much bigger than I originally envisioned 🤣🤣. thanks for the model~