SSD standard half-height solid-state drive portable enclosure

This was originally a test model, but

I later discovered it is auniversal standard half-height solid-state drive enclosure,

although it is not suitable for all sizes of half-height solid-state drives,

you can determine if your half-height solid-state drive is standard based on the hole spacing of the half-height PCB board inside the solid-state drive,

PCB board size: 54*52mm

PCB board hole spacing: horizontal 49mm (upper), 49mm (lower); vertical 30mm (left/right), 25mm (right/left);

                      the distance from the two upper holes (interface direction is up) to the top edge of the PCB board is 5.5mm and 10.5mm respectively

You need to choose a Type-C adapter board suitable for it, so you will have a portable hard drive that is lighter and plug-and-play than a 2.5-inch hard drive.