Search models, users, collections, and posts
Build plate Camera mount adaptor
IP Report
Print Profile(0)
Add the first print profile to earn points
Boost
2
1
0
0
1
0
Released
Description
Print with support. And make use of distance from Z distance is 0.32 if you Print with PETG because pets are hard to remove support.
The camera mount will be close to the hot bed so I strongly recommend you to use ABS or at least PETG. (Even PETG WILL SLIGHTLY CHANGE FORM IF BED TEMPERATURE IS OVER 80 Degrees, ABS HAS NO PROBLEM EVEN AT 100 DEGREES)
Use over 10 perimeters and over 70% infill
For Lerdge iX users with non-linear rails, you will need one longer M5 nut at least 34mm instead of the original 30mm
If this model helped you, please consider making me a small Donation buying me a coffee so I can continue doing more projects like this to share with you
Thank you in advance!!
License
This user content is licensed under a
Creative Commons Public Domain
Comment & Rating (0)