stephen curry hueforge
Print Profile(1)
Description
Project: stefan curry street art.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 160x240mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA bambulad cyan Transmission Distance: 1.7
PLA BambuLab Matte Ice Blue Transmission Distance: 3.5
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA PolyLite White Transmission Distance: 5
This print uses 6 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to cyan
At layer #12 (1.04mm) swap to Ice Blue
At layer #14 (1.2mm) swap to Red
At layer #19 (1.6mm) swap to Yellow
At layer #26 (2.16mm) swap to White for the rest.
pour ceux qui n ont qu un seul ams
pause ligne 15
noir-blanc
bleu cyan-jaune
possible de reduire la taille en x et y mais pas en z
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (9)