Zombicide Tile Edge System - Free 3D Print Model

Search models, users, collections, and posts

Dan Høegh

Toys & Games>Board Games

IP Report

Print Profile(1)

All

X1E

X1 Carbon

P1S

H2S

X2D

H2C

P2S

P1P

H2D Pro

H2D

A1 mini

A2L

0.2mm layer, 2 walls, 15% infill

Designer

3.5 h

2 plates

4.5(28)

Open in Bambu Studio

Boost

258

813

599

302

Released

Description

VERSION 2 IS AVAILABLE - IMPROVEMENTS/FIXES/STORAGE - FOLLOW THIS LINK

DEPRICATED: I'm keeping this version online in case someone needs spare parts

--------------------------------------

Print instructions:

Print the parts you need.
Keep supports on for the Corner pieces, remove brim if you are confident in your build plate.
For a Corner, you need to print the Corner and 2 clips (one of each type).
For a Straight, you need to print the Straight and 2 clips (one of each type).
You do not need to print clips for the Connector pieces.
The clips are pressed into place as shown on the images.
- Clips are designed to be put in at an angle.
- Use a hard surface to press the clip an the piece together.

Usage Instructions:

The system has been designed for easy use if you follow these guides.

Assembly: When assembling your tiles, put on the Corners and the Straights first, then add Connectors afterwards.
Disassembly: When disassembling, remove the Connectors first.

If a clip should unexpectedly break during disassembly at a game night, you can easily replace it without having to print a new large piece.

My Retro Arcade DisplayPixel collection:

Retro Arcade DisplayPixel

The cutest little 3D versions of classic arcade sprites. Comes with a beautiful frame.

My board game accessory collections:

Follow me for more!

You are welcome to help me by buying me a coffee, but it is not expected.

Design by Dan Høegh, 2025-2026
(unless otherwise stated in the above text)

Boost Me (for free)

It takes a lot of resources to prototype and test-print. The occasional boost helps a lot!

Membership

Print and sell my models. Get a commercial license. Only applies to my exclusive models!

Join

zombicide

zombicide 2nd edition

zombicide army of the dead

zombicide second edition

Comment & Rating (66)

@VexenX

Boosted

Pinned by Designer

Worked perfectly!

The designer has replied

@danhoegh

Thank you. Nice setup!

@eariberts1520

This is amazing work here! I just joined to ask you a question/provide some feedback. I have come across a couple of missions where tiles are meant to be placed off center of one another (see picture I attached as an example of a mission from the Washington DZ expansion set). Is it possible to add the ability to handle this scenario to your design? Looks like you would need half length black connectors and inside corners (opposite from the current outside corners you already have). This would allow your edge system to support just about any map design/layout I have come across!

The designer has replied

@danhoegh

Hi. Thanks for the comment and praise! I'll give it a go and see what I can come up with.

@eariberts1520

Replying to @danhoegh :

Oh I just looked at your STL files and realized you already have an inverted corner! So I guess really all thats required is a half length connector for this situation. Maybe i'll have a go at remixing the connector to different lengths to see what length works best. Again really great work here!

@danhoegh

Replying to @eariberts1520 :

Nice. Let me know if you succeed. Feel free to upload the new part to makerworld as your own. I’ll make sure to link to it and you can do the same the other way around.

@kroma

Print Profile

0.2mm layer, 2 walls, 15% infill

(Edited)

Other Issues:went higher heat now doesn't even go pass 2 percent build

The profile uploader has replied

@danhoegh

Hi and thanks for the feed back. If you have bed adhesion issues you should try adding a brim to the parts in question.

(Edited)

@kroma

Replying to @danhoegh :

same issue unfortunately tried with brims and still blew up like that

(Edited)

@danhoegh

Replying to @kroma :

Hmm... looks odd. This is uncommon, so let's se if we can solve it. I have no idea how experienced you are with 3D printing, so I'm going to suggest a couple of things that you might already have tried. 1: Clean the build plate using warm soapy water (dish washing liquid) and a sponge (not the coarse side, we don't want to scratch that plate surface up) 2: On the clean build plate, print only 1 of the parts that fails. Make sure to add as much brim as possible. I don't know which type of build plate or filament you are using and I don't know which temperatures you are printing at (bed and extruder). So if the above doesn't work or you already tried it, please let me know the type of build plate, filament and temperatures. Best of luck!

(Edited)

@user_750959157

Hi, in principle I find this really good. However, it fundamentally tears the corners when I print it, especially when I want to print them inverted. I loaded the file into Tinkercad to see what could be the cause. Screenshot attached. But I can't fix the "error".

The designer has replied

Show original

@danhoegh

Hi. I’ll take a look at it and get back to you.

@danhoegh

Hi. I've added "Corner - inverted v1.1.stl" to the STLs. It's not in the print profile, so you need to grab i separately. I couldn't reproduce the geometry error you experience, so I simply applied the "Fix" command to the object in BambuStudio. I hope it helps, since there is nothing else I can do to fix it, if I can't reproduce the error.

@user_750959157

Replying to @danhoegh :

Hi, thanks a lot. I will try. Maybe its a problem while i use the Anycubic S1 with the Anycubic Slicer Next.

@user_3373619992

Hello, I am very inexperienced with 3D printing. How exactly do I need to download this so I can commission someone to print it for me? Can you also create zombicide figures? Regards Paolo

The designer has replied

Show original

@danhoegh

Hi Paolo. If you want someone to print it for you, you can share a link to the model. Hope this helps 😊

@user_3373619992

Replying to @danhoegh :

thanks for the help. but I don't have a Model, just a picture of 5 fan made zombicide cards. I want models for those 5 cards before I use them. but I can't find a way to get the models

@danhoegh

Hi. I don’t create minis. Look around to see if you can find a creator that does. 😊

@xSachax

Print Profile

0.2mm layer, 2 walls, 15% infill

Simply amazin, will try to improve it a bit for a 3x3 congif to add inner part tu support the middle tiles

The profile uploader has replied

@danhoegh

Thank you for the kind words. I’ve tried a couple of possible solutions for the middle tiles, but ended up with this, since the other tiles keep them in place anyway. Feel free to make an add-on. I’ll link to it if you just give me a nudge.

@xSachax

Replying to @danhoegh :

Thanks ! working on it, the middle tiles are somewhat a bit too low, will ping you if i manage to do something useful !

@user_2354993919

Print Profile

0.2mm layer, 2 walls, 15% infill

had to print at 50% to keep it from unraveling midprint.

The profile uploader has replied

@danhoegh

Ok. Thanks for the feedback. Which filament type did you use and which printer?

@user_2354993919

Bambu Labs A1 mini. Used their regular PLA.

@Bohdi_Li

Print Profile

0.2mm layer, 2 walls, 15% infill

always detaches from plate no matter how slow I make it print or how hot the plate is.

(Edited)

The profile uploader has replied

@danhoegh

Sorry to hear that. Have you tried adding a Brim on the part(s) in question?

@Bohdi_Li

am a noob at all this so not sure how to do that. heck didn't know I could do that.

@Lorentzeus

do you happen to have a version for non-city zombicides? like for fantasy (in my case white death), this would do the job, but i'm asking because the "straight" piece is designed to fit exactly in the street zone that is made when connecting 2 tiles, and for fantasy ones, the zones are (almost) always 1/3 of the tile, so these holders wouldn't align

The designer has replied

@danhoegh

Thanks for the feedback. I’ll see what I can do.

@jonogo

Boosted

One of the best models I've used for Zombicide!!

The designer has replied

@danhoegh

Thank you so much for the very kind words!

@churpa01

Print Profile

0.2mm layer, 2 walls, 15% infill

This system works amazingly well to hold the zombicide times together. thank you

The profile uploader has replied

@danhoegh

Thank you so much. I hope you enjoy it.

(Edited)

License

If you want to use this model commercially, please join my membership.

Join Now

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.