Tamiya & Mr. Hobby Glue Station - Free 3D Print Model

Search models, users, collections, and posts

Bot the Builder

Hobby & DIY>Other Hobby & DIY

IP Report

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

H2D

A1 mini

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.1mm layer, 2 walls, 15% infill

Designer

58 min

1 plate

5.0(8)

Version 2: Two Mr. Hobby Bottles and One Extra-Thin Bottle

Designer

1.2 h

1 plate

5.0(3)

Open in Bambu Studio

Boost

103

Released

Description

Hello!

This is a stand/no-spill/organizing base for Mr. Hobby's Mr. Cement and Tamiya's Extra Thin plastic cement.

The base should also hold Tamiya's square-shaped Cement, Panel Line Accent Color, Mark Fit, Liquid Surface Primer, Polycarbonate Cleaner, Accent Color, and Paint Retarder

*Measurements based only and primarily off of Tamiya's Extra Thin Cement and Mr. Hobby's Mr. Cement*

This is a convenient way to keep highly used supplies like plastic cement nearby and separate from other tools and paints and be able to keep them close by. This base also allows the cement to have a larger and weighted-down base to minimize accidents and spills.

Note: This design is for personal use only. Please do not use my prints or designs for commercial purposes.

Feel free to reach out if you have any questions or feedback on the design—I’d love to hear what you think!

Comment & Rating (30)

@DetectiveRed

printed the new variant for all my commonly used solvents, works great to keep them seated and easy to work with in an unothodox workspace and shelf setup

The designer has replied

@BlueBotBuilt

thats great! thanks for asking! if there’s anything else that could improve your work space, feel free to ask!

@DetectiveRed

hey would it possible to make one that holds two of the round Mr hobby bottles alongside the Tamiya extra thin square one? just looking for a more permanent solution to prevent my setter, softer, and extra thin from falling over

The designer has replied

@BlueBotBuilt

hello! yes absolutely! i just steched up a quick thing to see if this is what you would want. just to confirm, it would be the same size bottles and two of the mr hobby 46 mm round bottles and one 43 mm square tamiya bottle? let me know and I can design something asap!

@BlueBotBuilt

also, I don’t know if you already printed one, but I originally stuck some blue-tac underneath the bottles and its still holding stong months later!

@DetectiveRed

the thin one would work great, to slide it in and out of a shelf in my workspace

@user_2202303680

Boosted

Thank you for your wonderful work To make it even more user-friendly Please make 3 round bottles and 3 square bottles

Show original

@Qwaun

Boosted

Print Profile

0.1mm layer, 2 walls, 15% infill

The profile uploader has replied

@BlueBotBuilt

thank you!

(Edited)

@Qwaun

Boosted

Replying to @BlueBotBuilt :

I liked your form fitting design and the wide base... When I am glueing, I am not paying attention to the cement bottle and inevitably knock them over or spill. The wide base and form fit fixes this problem perfectly and without getting unnecessarily complicated. It is a good design.

(Edited)

@BlueBotBuilt

Replying to @Qwaun :

i appreciate it! Ive knocked over a couple in the past. with this, its never been an issue.

@user_2861743241

Print Profile

0.1mm layer, 2 walls, 15% infill

The profile uploader has replied

@BlueBotBuilt

Thank you!!

@FOOTTALLROOSTER

Print Profile

0.1mm layer, 2 walls, 15% infill

The profile uploader has replied

@BlueBotBuilt

thank you!

@mazedlx

Print Profile

0.1mm layer, 2 walls, 15% infill

(Edited)

The profile uploader has replied

@BlueBotBuilt

thank you! if you think of anything that would improve your workspace/tool storage, let me know! id be glad to design something for your needs.

@user_2409492672

Print Profile

0.1mm layer, 2 walls, 15% infill

The profile uploader has replied

@BlueBotBuilt

thank you!

(Edited)

@BlueBotBuilt

I would appreciate any and all comments! If you have something that doesn't fit but you want something of similar use and shape, let me know and I'll make a file for it! Thanks!

@user_2036125772

Print Profile

0.1mm layer, 2 walls, 15% infill

The profile uploader has replied

@BlueBotBuilt

thank you! i also have a profile for three bottles if you’re interested. I also have a couple other modeling related things on my profile. if you think of anything that could improve your workspace, feel free to let me know!

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Mr. Snek

Printzee

10.4 k

4.4 k

Plastic Model Glue Stand - for TAMIYA & Mr.Hobby

iGniSPY

263

Vacuum Bag Pump Station

MOSS 3D

9.9 k

4.9 k

Steam Deck Stand V2

revoun

9.2 k

1.3 k