Search models, users, collections, and posts

Thiccly Moss Pole Dripper Attachment

IP Report

Print Profile(1)

All
A1
H2D
P1S
P1P
X1 Carbon
X1E
X1
H2D Pro
H2S
P2S
H2C
X2D
A2L

0.16mm layer, 3 walls, 20% infill
0.16mm layer, 3 walls, 20% infill
Designer
9.3 h
2 plates
5.0(7)

Open in Bambu Studio
Boost
70
263
10
3
139
87
Released 

Description

I've made two sizes of drippers to attach to the top of Thiccly brand moss poles (because these are the ones I exclusively use), so that keeping the pole damp is less labour intensive! I wanted a super basic design that wasn't too visually intrusive, because the main stars of the show are my plants, not the drippers! 

 

Thiccly poles have a small flap on the sides which allow the poles to stack, so I've included little extrusions on each side of the dripper that clip into these holes, which allows the dripper to be more securely fixed at the top of the pole.

 

The large dripper measures 9.3cm wide, 5cm deep and is 15cm high. It has a capacity of around 370ml (12.5fl oz).

The medium dripper measures 6.3cm wide, 3.3cm deep and 18cm high. It has a capacity of around 185ml (6.25 fl oz).

 

You'll need to cut a length of wicking cord to feed through the dripper, and over the day or so after filling, the water will be slowly wicked down the pole. Although I haven't had any issues with water leaking so far, I definitely recommend spraying the interior with water proofing spray for added security. I've used this dripper for the last three months over the summer and it was game changing!

 

Feel free to modify to fit your personal needs, but please don't sell derivatives of this work.

Comment & Rating (10)

(0/1000)