Saved a brand new Tobbie for the kids. thank you!

A Teece

0.2mm layer, 2 walls, 15% infill

You're welcome - glad you found it useful.

Lord Axil

cover

tobbie2_321230f4-2810-41d0-a60c-a195af879a47.jpg

plate_1.png

plate_2.png

tobbie1_a8ced011-d51e-47ba-ac45-c5f8ae5b2d0e.webp

IMG_0575.jpg

I found the original profile broke in a similar way to the original part, the top bar fracturing off due to layer adhesion under load. I fixed it by printing at a 45 degree angle, which also simplified on the supports.&nbsp;I&#39;ve also removed 0.1mm from the height of the model to make it a tighter fit to the central clip (that will make sense if you&#39;ve built a Tobbie) - mine fell off while walking.&nbsp;Although not included in this profile, I found it helps to use a PETG Support Material for the interface to simplify removal at the bottom. Not essential though. No changes to Plate 2 because I didn&#39;t need those parts.

Slightly tighter fit and printed at 45 degress for strength

replacement legs part for Tobbie the robot

Replacement parts for leg attachment for Tobbie the Robot. Based on an original model from <a target="_blank" href="https://www.printables.com/model/602803-replacement-legs-part-for-tobbie-the-robot" rel="nofollow noopener">https://www.printables.com/model/602803-replacement-legs-part-for-tobbie-the-robot</a> but added a compatible rigid attachment and rotating coupling for connecting to main leg assembly. The rigid attachment will need to be superglued in, but restored my Tobbie to a working state.

Print Profile(2)

Description

Comment & Rating (2)

This remix is based on

License

Related Models

Tobbie the Robot replacement leg parts