Bladeless Fan 140mm - Free 3D Print Model

Search models, users, collections, and posts

Remixed by

jtumi13

Hobby & DIY>Electronics

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

35.2 h

11 plates

4.5(2)

Open in Bambu Studio

Boost

139

378

Released

Bill of Materials

List other parts

FanController x 1: https://a.co/d/3zeUBq6
140mmFan x 1:

Description

This is a remix with a few changes of the bladeless fan v2: https://www.thingiverse.com/thing:4173466
I widened and deepened the fan to support 140mm fans such as the be quiet 140mm pure wings fan I am using. I then widened and deepened the fan booster, the tube connector, and the inner and outer shell.

This allows for more air to make it through the fan. This plus the support for 140mm fans (which have greater static pressure) allows for the fan to actually output a good amount of air while not making much noise.

The airflow direction tube can be manually moved left and right to support off axis use.

I also added a fan controller shelf to hold my fan controller which looks like this: https://a.co/d/3zeUBq6
You can then take off the built in knob and feed it through the base and connect the new knob on it for a nice look.

Comment & Rating (5)

@norgur

Hey, sadly your instructions and the ones of the original are quite nebulous to me. Can you perhaps share a foto of the interior of the fan so we can check if the thing will actually fit our needs before we sink endless hours and filament into it? That would be awesome!