Minimalist Screen Bezel for H2D / H2C / H2S

Add a touch of colour to you H2 with this Minimalist Screen Bezel!

Printing is fast and assembly is easy. And you can still tilt the screen.

Print preparation:
Make sure that your print bed is clean and grease-free and use a quality brand and dry filament. Make sure your filament is calibrated. I tested this bezel with Bambu, Sunlu, Ebricko and eSun PLA without any issues.

Print settings:

Use the 0.2mm standard settings for everything. That's it. No support, no brim, no AMS.

Assembly: 

The bezel will be clipped-on you H2's screen.

Info: The bezel's cutout goes to the top of the screen. This is important for the tilting mechanism.

Slide the bezel on the bottom of the screen.

Now push-up the lower right corner and clip-on the upper right corner to the screen.

Repeat for the left side - push on the bottom, click on the top.

..and do not forget to remove the screen protector foil, like I did.

If you want to support me you can leave a tip at ko-fi.com/blecheimer.

Disclaimer:
This work by blecheimer is licensed under a Standard Digital File License. It is for personal use only (e.g. printing, gifting, presenting, showing). All files and any prints of it must not be used commercially. Any form of charging money or collecting fees for this model is strictly forbidden.
Sharing, sub-licensing, selling, renting, hosting, transferring, distributing, adaptation or derivates in any form or format is prohibited. This includes remixes. Copying or hosting this model to other digital websites, online stores or cloud services in general is not allowed.