Hexagonal lamp for 10mm LED strip

I've built a case for Bambu Light strips (10mm). If you print 16 of these, you can put nearly the whole 5m strip inside.
Easy to print, with 3 different diffuser caps.
 

I've super-glued the hexagons, but there's a hole in the middle, so you can also directly attach them to a board / to the wall.
Each hexagon has 6 holes for the lightstrip, so you can just insert it there, and daisy chain it to the next one. Inside is a guide that fits the 10mm lightstrip very nicely. It's supposed to fit 3 LEDs on each side, make sure to align the cutting marker on the strip in the edge. That way, the light diffuser will exactly fit on the LEDs (especially the curved one).

I recommend to first glue/mount all hexagons, then insert the striplight. If you want to have all the light in all the hexagons, you have to wire them not one by one, but find a path that addresses all walls. 

I used Sunlu Filament for mine, just standard white / plack PLA. It does a good job in diffusing / blocking the light. Actually it looks way better in real, the camera does catch up the LEDs better then the eys does.

Have fun with this project, I appreciate seeing your results!
If you have any questions, I'll be around.

Stefan