Jewelry box organizer - mandala - Free 3D Print Model

Search models, users, collections, and posts

Bartosz Jóźwiak

Tools>Organizers

IP Report

Print Profile(1)

All

A1 mini

P2S

X1E

P1S

H2C

H2D Pro

X1 Carbon

H2S

P1P

X2D

H2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

2 h

2 plates

4.3(18)

Open in Bambu Studio

Boost

232

600

432

296

Released

Description

Jewelry box - organizer - mandala

Boost Me (for free)

Comment & Rating (22)

@mladen85

Print Profile

0.2mm layer, 2 walls, 15% infill

thank you for the design

The profile uploader has replied

@Bartoszj

@novy

Print Profile

0.2mm layer, 2 walls, 15% infill

Strength Issue:thin walls. layer thickness thin

Bed Adhesion Issue:while I wanted to love this I can’t. used 60C for bed temp initial layer 220 for pla and still have corners peeling up. the overhang to secure lid didn’t print good and lids didn’t fit without sanding them down. walls were too thin from profile and almost see through. also compartments are tiny without dumping everything out tough to get anything out you put in small boxes. lid design is nice and what drew me to this. if I had to print this again I would increase size increase wall thickness and try to figure a way to print that overhang.

@ramon5130

It happened to me too, the design is good, but the layers are too thin, the lid doesn't fit perfectly unless you sand the box a little, the design didn't convince me too much, it's nice, yes, but it has details to modify in my opinion

Show original

@user_2746346275

Boosted

Beautiful little box . Thank you very much for it. 💖 The few supports were easy to remove

Show original

@complexxL9

Print Profile

0.2mm layer, 2 walls, 15% infill

(Edited)

@Isaura.3mf

Print Profile

0.2mm layer, 2 walls, 15% infill

@Vedad

Print Profile

0.2mm layer, 2 walls, 15% infill

very good!

@user_3340180740

Beautiful project! Based on the observations, I look forward to an update with increased walls, bottom, and top to print!

Show original

@Gustafa311

Print Profile

0.2mm layer, 2 walls, 15% infill

@user_1695214636

Print Profile

0.2mm layer, 2 walls, 15% infill

@user_208436060

Print Profile

0.2mm layer, 2 walls, 15% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.