Search models, users, collections, and posts
ski vise
IP Report
Print Profile(3)
0.2mm layer, 2 walls, 15% infill
Designer
8.1 h
2 plates
0.2mm layer, 2 walls, 15% infill
6.8 h
2 plates
80% size to print for the a1-mini
4.2 h
2 plates
Open in Bambu Studio
Boost
235
738
42
39
688
393
Released
Description
Description
Ski vise. For working on waxing skis or fixing your skis/snowboard.
You can put your ski/snowboard vertically or horizontally on the vise.
The units of the drawing in the picture are mm.
Material
- PETG (PLA should also work) for main body, screw, and screw insert
- Note that the screw and screw insert must be printed with 100% infill.
- In the print profile, I also add a modifier in the clamp body to add more infill for clamp strength.
- TPU 95A for pads
Change log
- V1 (2023-12-23): First upload
- V1.1 (2024-02-13): Top TPU pads were upgraded
- Increased top surface friction as I found the ski tends to slide during scraping.
- Rounded edge to prevent hurting your hand when using it.
- Compatible with V1 body. (For those who have printed the V1 version, you can simply select `pads v3.stl_1` and `pads v3.stl_2` from the TPU plate in the print profile. Remember you usually need 4 pads as one vise requires 2 pads to work.
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (42)