STURDY Knitting Loom Set (8-piece)
Print Profile(1)
Bill of Materials
- Epoxy or JB-Weld x 1:
- 3/32 x 4 inch Stainless Rods x 1:
Description
Boost Me (for free)
If you like my models or find them useful, please Boost!
Sturdier Knitting Looms in 4 sizes. The stronger pins will not break easily. I recommend printing with Bambu Labs PETG-HF.
I made these looms to be assembled after printing, which strengthens the Pins as they are printed horizontally to the plate. I tried other models that were one-piece prints, and the pins easily broke off.
You will need a Rubber Mallet for assembly. The pins are friction fit.
For the Knitting Hooks, you will need some 3/32 stainless rods 4 inches long.
Boost Me (for free)
If you like this model please click Boost!
Grind/Sand one end into a point (not too sharp) and bend it with a pliers.
To prepare the Handles for the Stainless Hook clean out the hole with a 3/32 drill bit for friction fit or a little bigger for gluing in place with epoxy or JB Weld.
Good Luck and Enjoy!
Boost Me (for free)
If you like this model, leave a boost.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (9)