Z-axis cap for P1P, X1 and X1C  |  Loose fit!

For all the people who want to give feedback on the fact that this cap is too loose of a fit:

The reason of the loose fit that rotates easily is that not in any case you want a z-axis dust cover to grip, snap or sit to tight at the top op the z-axis screw rod. Just the slightest resistance of a cap against the z-axis screw rod can result in layer defects.
So I advice you to go for the safe option, in stead of the tight option.
And if you don't want any risk whatsoever, don't use a cap at all. Not even mine that has a loose fit.

I use them now for over a year and never had any z-axis defects, pop off's or other issues.

Features:

• Shields the metal z-axis end-bearing from dust and filament debris.
• Material: Bambu Lab Black ABS.
• Chamfered bottom and top.
• Diameter: 19mm.
• Height: 2mm.
• Includes 1,5mm inside indent for z-axis metal protrusion.
• To be placed on top of the z-axis.
• Sightly smaller then the z-axis hole so the cap can rotate freely if needed.
• Printed on Bambu Lab PEI textured plate to match the plastic z-axis mount matte finish a bit.
• Easy removal: just press your finger a few seconds on the cap and lift it off.

Disclaimer:

This design is free to download including the accompanied files. By downloading this design, you agree to the following:

• as with all designs that you didn’t make and test yourself, mine may work or won’t for you,
• I can’t give any guarantees for the print you make, the way you do it and which tools u use,
• no rights can be derived and I can’t be held liable.

If you have questions or suggestions, please contact me by message. In case you need an adjustment or re-design, I’ll perform those upon payment. 

If you like what I made and want to tip me for it, please do so at your discretion at Ko-Fi.

Have fun and enjoy being creative!