T-pose - slim dual AMS riser for H2D, H2S and H2C

Warning: Use a material with a softening temperature above 65°C (not PLA) if you intend to use the ams 2 pro drying function or the H2D/H2S/H2C chamber heater. 

Update: 

• Improved bridging. No support structures needed
• Version A now supports a wider range of screws (M3x16 to M3x30)
• Added print profile for optional dovetails without keytabs.
• Added T-Pose HT version, which holds two full size ams units and one AMS HT

This riser allows you to put two AMS or AMS 2 Pro on top of your H2D, H2S or H2C. It is designed to not restrict airflow, allowing you to use the AMS 2 PRO drying function. It's easy to assemble and prints on a single H2D/H2S build plate. You can optionally use eight M3x16, M3x20, M3x25 or M3x30 screws for a more secure fit or the leftover screws from your H2D/H2S Combo unboxing (please pick the right print profile).

If the bracket doesn't fit on your H2D/H2S because you are experiencing excessive shrinkage with your chosen material, you can print the optional extenders, which increase the size of the bracket by 3mm. This should not be necessary with PETG and most CF filaments.

Assembly

If you want to place two full-size AMS units and one AMS HT on your printer, pick the T-Pose HT version. The parts are not compatible with the dual ams version. If you already have that, it's not enough to print the middle connecting pieces. 

If you are looking for desiccant boxes for your AMS 2 PRO you can find them here:
https://makerworld.com/en/models/1284049-easy-fit-ams-2-pro-desiccant-boxes

Check here if you are looking for a refill spool that will work with the AMS 2 PRO rotating drying feature.

https://makerworld.com/en/models/1347643-ams-2-pro-compatible-reusable-spool