Steering wheel Quickswap for Logitech G29 - Free 3D Print Model

Search models, users, collections, and posts

Svenjamin

Hobby & DIY>Other Hobby & DIY

IP Report

Print Profile(5)

All

P1S

P1P

X1 Carbon

X1E

H2D

A1 mini

H2D Pro

H2S

P2S

H2C

X2D

A2L

Both pieces combined - 0.2mm layer, 2 walls, 15% infill

Designer

1.5 h

1 plate

4.4(14)

Only the Nut part - 0.2mm layer, 2 walls, 15% infill

Designer

59 min

1 plate

3.5(2)

Only the Screw part - 0.2mm layer, 2 walls, 15% infill

Designer

42 min

1 plate

2.0(1)

won't snap! 10h tested 0.2mm layer, 6 walls, 20% infill

3.2 h

1 plate

4.7(3)

Click to see more

Open in Bambu Studio

Boost

297

584

564

329

Released

Description

Here is my Quickswap mechanism for the Logitech G29. To remove the Original one you need to disassemble the whole steering wheel. There are instructions how too do it, i used this: https://www.youtube.com/watch?app=desktop&v=kTvy3rLhJVc

I used the Original screws for the Base and M5 Screws and Nuts for the Wheel part.

Comment & Rating (35)

@user_428188130

very wobbly

@3D_Go

Print Profile

Only the Nut part - 0.2mm layer, 2 walls, 15% infill

very nice

@user_2553411737

hey, which paddle extenders do you use? I want to print this but I think the paddles would be too far away.

@sparkycreations

just loving it! but added a base for OMP wheel aswell! 10/10!

@Arvixs

Print Profile

Both pieces combined - 0.2mm layer, 2 walls, 15% infill

works ok

@LP9Engineering

Print Profile

Both pieces combined - 0.2mm layer, 2 walls, 15% infill

I downloaded the quick release model for Logitech G29 from MakerWorld and printed it on my Bambulab X1 Carbon I must say the file is excellent: the design is well thought out, precise, and optimized for 3D printing, with no need for complex modifications or supports The geometry is solid and functional, with correct tolerances allowing for simple and stable mounting on the steering wheel The print on the Bambulab X1 Carbon was flawless: uniform layers, smooth surfaces, and well-defined details Once mounted, the quick release performs reliably, ensuring quick and hassle-free installation and removal of the steering wheel This model is extremely useful for anyone using the G29 and wanting to improve the practicality of their simulation sessions I highly recommend this file to anyone looking for a functional, ready-to-use, and high-quality accessory for their sim racing setup

Show original

@Waltero_printin

Print Profile

Both pieces combined - 0.2mm layer, 2 walls, 15% infill

Works very well. The only thing is, when the wheel is on, your fingers are much farther away from the paddles and buttons. farther than i expected. still a great print

@joyin.the.best

use a h shifter if you can

@user_2775613232

Replying to @joyin.the.best :

yeah but it doesn't work for formula or gt

@miss_pummel2011

Print Profile

Both pieces combined - 0.2mm layer, 2 walls, 15% infill

@user_3335249434

I want to print this I have tried a different quick release and it wobbled and snapped just wonder for people who have printed if it wobbles?

@user_3267453020

washers on the four holes on the base that do not have the rised bit

@JamFizzle

does this work with a g920?

@user_3311678244

yes

@zockerking2929

Print Profile

Both pieces combined - 0.2mm layer, 2 walls, 15% infill

very nice and good for everyday use

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.