NBC.5 v2 - 1:10 Scale Light Tower

Scale Light Tower

I recommend following the Build Guide when assembling.

The list of necessary hardware is in the Build Guide.

Please contact me in case of questions or any confusion.

UPDATE v2

2025/04/11 - Reworked stands. Slightly reinforced. Optimized for printing (cleaning the holes was really complicated). Added support for S-size tubes.

2025/04/12 - Added a short version of the stands.
2025/05/05 - Slightly reinforced walls on 016_cover_v2.stl for higher strength.

What you will need

Outdoor Camping Blow Fire Tube or similar (Mine have a diameter of 8.8 and 12.8 mm. And the height of one element is about 130mm.)

58mm Soft Rubber Wheel Tires or similar. 
Bearings 5X10X4 - 2x.
LED strip 25x10mm - 4x - cuttable 25 mm.

Switch for hole 18.3 x 12.4 mm (005_body_front_B) or a toggle switch installed inside (005_body_front_A).

Warranty

The author makes no guarantees for completeness and security. The instructions may contain errors in the description of the procedure and in the list of necessary hardware. The author has taken great care in the creation of the print files, but problems can still occur. The author is not responsible for any issues that may arise.

The model is provided as is. The necessary tools must be available for assembly.

If you print it, I'd love to see it. Share here or tag me on instagram.

Instagram: @nb_crawling