Clothes rod holder 10, 12 & 15mm
Print Profile(1)
Bill of Materials
- Rohr/Stange x 2: 10,12oder15mm
- Schraube x 12:
Description
Since we unfortunately ran out of space on the regular clothes rod, I designed a holder so that we can attach an additional clothes rod in the closet.
I still had some 12mm pipe lying around at home, but you can of course use anything.
Dimensions:
60mm long
50mm wide
3mm thick
38mm high
The pipe hangs approximately 30mm from the ceiling
There are more holes than necessary on the base plate, theoretically 4 screws are sufficient, but if you want to be on the safe side you can of course use more.
I have designed end and middle pieces so that the rod cannot slip out.
Each print plate has 2 end pieces and a middle piece, but you can of course generally add more.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)