Lucky 777 Casino Slot Machine
Print Profile(2)
Bill of Materials
- D4x3mm Round Magnet x 2:
- Rubber Ring 56mmΦ × 2.0mm x 1:
- 502 Glue x 1:
Description
Lucky 777 Casino Slot Machine! Start Your Journey of Luck! Design by Mini Egg
(Please read below Key Assembly Steps carefully and enjoy the magical experience brought by 3D printing)
Product Description
The Lucky 777 Casino Slot Machine is a mini pocket-sized slot machine assembled from PLA plastic, bearings, and small magnets, bringing you an authentic casino game experience. As the roulette spins, the magnets create a crisp and pleasant sound upon impact, making it both a fun party game and a stress-relief toy that you won’t want to put down!
Additional Parts Required
✅ Bearings R188 × 3
✅ Round Magnets 4mmΦ × 2mm × 21
✅ Round Magnets 4mmΦ × 3mm × 2
✅ Round Magnets 8mmΦ × 3mm × 2
✅ Rubber Ring 56mmΦ × 2.0mm × 1 (diameter=56mm)
✅ Super Glue
Printing Notes
🔹 Optimized for Printing: All parts are pre-organized into separate files for easy printing and assembly.
🔹 Size Adjustments: Due to material shrinkage variations, screw components may require 1% size adjustments to ensure a perfect fit.
🔹 Recommended Material: PLA for best results.
🔹 Fine Detail Printing Tips:
- Use a 0.2mm nozzle for printing roulette patterns to achieve crisp visual details.
- After printing, use glue to attach the patterns securely to the roulette.
Key Assembly Steps
- Install lever magnets
Use two 4x3 round magnets (attracting) and two 8x3 round magnets (repelling). If installed incorrectly, use a hex screwdriver to push the magnets out and reinstall. Each magnet has its dedicated slot for easy assembly and remova
- Insert the axle, and install the lever and large gear
Pay attention to the orientation of the large gear. A small hammer can be used to assist with the installation.
- Apply the pattern and indicator arrow
Use glue to affix the design pattern and the indicator arrow onto the wheel.
- Install the wheel bearing and magnets
Ensure all magnets are aligned in the same orientation.
- Install the wheel's gear and secure it by leveraging the gear slot at the bottom
Position the wheel's gear correctly and fix it via the designated bottom gear holes.
- Assemble the connecting axle and wheels
Use the connector axle to complete the wheel assembly.
- Insert the wheels into the main body and fix it with the key
Mind the direction and use the key to secure the connector axle.
- Install the 4x2 small bottom magnets and tighten the screws
Ensure the small magnets attract the turntable magnets. Tighten the bottom screws using the key.
- Adjust the sound effect
Tightening the bottom screw makes the turntable silent; loosening it produces a clicking sound from magnet impact.
- Install the rubber ring for stability
The rubber ring ensures a stable placement and prevents movement during use.
finish
🎰 Create your own Lucky Slot Machine and embark on a journey of fun and fortune!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (26)