Quadfecta Tripod Trays for an Unistellar Tripod

Version two of my tripod trays with new add-ons.

These are built around a Unistellar Tripod which seems to be universal for all of their telescopes. In my other projects I created safety rings that could be printed in glow-in-the-dark (GITD) PETG so one does not trip over a tripod leg. The other item was a holder for the endcap pieces for the telescope. What version two does is combine both while creating a snap-on tripod mount that can accept more weight and be used as safety rings.  Here are the models. I have printed and tested each. I used a non-Bambu GITD PETG because they do not offer one. I had a few misprints as a result. The big items was cleaning the plate before each print and drying the filament as well. That seemed to make the process better. 

Here is what is in the Quadfecta which is actually 

1. End Cap Holder: A simple mount for the eVscope end cap. Snaps right on and uses the hole in the bahtinov mask as a retainer. Version one which is on another model works almost as well but comes off with less downward pressure.

    

2. Simple round tray. Measures just about 4 inches (100mm) with a lip to hold simple objects.

    

3. Power Bank holder / Tray: The eVscope can use up some battery power. I use a portable power bank to compensate for battery use. The tray holds the battery and has a small tray on top for storage purposes. I added a mag safe ring to the top of mine to hold a phone in place.  Note, having both on gets close to the weight limits for a tray. The battery bank opening is 5 inches long (127mm)  by 2 7/8 inches (73mm) wide by 5/8 inches (16mm) tall.

    

4. Magsafe Tray: Simple small tray to hold a magsafe ring so you have a place to set your phone down while using the eyepiece.    I used the Nillikin Magsafe Wall Mount system that can be purchased on Amazon (Approx. $13 USD for two rings)