Ubiquiti Unifi Flex Mini 2.5G Wall Mount Bracket - Free 3D Print Model

Search models, users, collections, and posts

digitalpoint

Hobby & DIY>Electronics

IP Report

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

H2D

A1 mini

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

43 min

1 plate

4.8(45)

Open in Bambu Studio

Boost

318

666

573

Released

Description

A wall mount (or under-desk) for a Ubiquiti Unifi Flex Mini 2.5G (USW-Flex-2.5G-5). Can be mounted in horizontal or vertical position with #8 or #6 screws (2 screws are needed, orient the screws whichever way works best for your setup).

Fast print
Requires no supports
Can be horizontal or vertical orientation
Can be mounted under a desk
Works with standard #8 or #6 screws with flat head
Original design

Comment & Rating (55)

@lexxone

Great design. Simple, fast, small, and reliable. I needed to clear up some POE ports on another switch, so decided to print this with a little leftover Marble PETG I wanted to get rid of with 100% walls; result is 1h print at 25g on A1 mini, already installed and working great!

@BeerdasDrygoods

Print Profile

0.2mm layer, 2 walls, 15% infill

just what I needed. thx

@Kewin_DIY

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Simple and perfect design. Just what I needed, thanks👍

@r.michalov

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Prints perfectly. I would recommend scaling it down to 99% for "press fit". At 100% there's little rattle.

@nickmv

What's there to rattle? The switch has no moving parts.

@r.michalov

Boosted

Replying to @nickmv :

I may have used the wrong word—I was trying to describe that the switch has some play in the holder and could move freely. I prefer a snap-fit where it is held firmly in place.

@stryguy

Boosted

Thanks for the 99% tip. That's the perfect size. Zero play, the switch snaps into place and it takes true force to remove it from the mount. Thank you for the tip!

@vertti

Print Profile

0.2mm layer, 2 walls, 15% infill

Drops out from under-the-desk mount a bit too easy, slightly stronger or longer hooks would help.

@joev159

Print Profile

0.2mm layer, 2 walls, 15% infill

Awesome! Scaled 99% and it fits perfect!

@user_2088117856

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

perfect fit, good grip :)

Show original

@user_4004865048

Print Profile

0.2mm layer, 2 walls, 15% infill

Prints well, fits well. Like the other commenters says if you want a tight fit, scale down a tad. Mine sits in a media box so (hopefully) I won't see it again for a long time so it doesn't matter to me.

@x2on

Print Profile

0.2mm layer, 2 walls, 15% infill

Printed on 99% fits best.

@user_76936097

Print Profile

0.2mm layer, 2 walls, 15% infill

reduced to 99% and fitted perfectly

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.