1980's Strawberry Shortcake Hueforge 156x250mm

If you need to re-size, be careful to uncheck “uniform scale” and ONLY change the X and Y axis. Do not resize the Z axis, or it will mess up the colors.

If this is your first Hueforge print, be aware that the image will look a little off in Bambu Slicer, because the slicer can't compensate for the blending of colors. It will print correctly, if you haven't resized the Z axis.

Can be printed with or without AMS. Without AMS, you can do manual color swaps, as each layer is a single color. Layer swap instructions below.

Instructions:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 155.83x250mm in size
You may print at higher layer heights below the Min Depth of 1mm
The Max Depth is 4mm and the Actual Depth is 3mm

Filaments Used:
    PLA BambuLab Matte Grass Green Transmission Distance: 1.7
    PLA PolyTerra Wood Brown Transmission Distance: 0.3
    PLA BambuLab Basic Brown Transmission Distance: 2
    PLA BambuLab Matte Dark Red Transmission Distance: 1.5
    PLA BambuLab Basic Jade White Transmission Distance: 4.3
    PLA Hatchbox Pink Transmission Distance: 12
    PLA PolyTerra Pastel Peach Transmission Distance: 3.5
This print uses 7 unique filaments
 

Swap Instructions:
    Start with Grass Green
    At layer #15 (1.28mm) swap to Wood Brown
    At layer #17 (1.44mm) swap to Brown
    At layer #19 (1.6mm) swap to Dark Red
    At layer #23 (1.92mm) swap to Jade White
    At layer #28 (2.32mm) swap to Pink
    At layer #30 (2.48mm) swap to Pastel Peach
    At layer #32 (2.64mm) swap to Jade White for the rest.