Feeding tray for "Boatman Actor" bait boat
Print Profile(1)
Bill of Materials
- Stange (Achse) rostfrei x 1: Ø 3mm Länge 75mm
- Torsionsfeder x 2: Ø 5mm 9 Runden 180° Draht Ø 0,7mm (Qrity TH03-0.7-5.0-9-180 oder Vergleichbar)
Description
This bowl replaces the original door for the stern feed hatch of the boat. This is triggered by the installed servo.
The hinge is mounted using the two original screws.
Required are 2 pcs torsion springs (see parts list) and 1 pc axle Ø 3mm L= 75mm
The spring must be shortened and bent as shown in the picture. Assembly may require some patience. The axle with the tensioned springs is mounted first and then pushed out on one side, the first side of the bowl is threaded and then pushed in the other direction to thread the second side of the bowl.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)