knife sharpener - Free 3D Print Model

Search models, users, collections, and posts

quentin

Tools>Hand Tools

IP Report

Print Profile(1)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

5.2 h

1 plate

4.8(20)

Open in Bambu Studio

Boost

381

1048

559

234

Released

Bill of Materials

List other parts

joint taurique 60x54x3mm x 2: nitrile
aimants 8x2mm x 8: neodyme
roulements à billes 8x22x7mm x 2: roulement standard

Description

Content has been automatically translated.

Show original

kitchen knife sharpener, simply prints.

simply stick with double sided tape a sandpaper with a fine enough grain(800, 1000 or finer)

Comment & Rating (33)

@user_3036292437

The cylinders are not seated. The cylinders need to be seated in the central apparatus. As you move it back and forth, the cylinder needs to rotate so that the sandpaper can move and sharpen. I think this is a flawed design, but I thank the person who made it.

@user_1718155618

your flawed. this works perfectly

@delh

You have to add some rubber bands in the groove of each wheel so the wheel turns and does not rub the central body on the table

Show original

@user_1385374146

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Printed well in PET-G. All magnet and bearing holes press fit well. May want to change the roller design to accommodate readily available sanding disc sizes.

@Burg871619

Boosted

does anyone know where I can find the magnets for the block part?

The designer has replied

@quentinroger

They are readily available on Amazon

Show original

@christopherle

Search for neodymium magnets

Show original

@Rhoendrucker

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

👌

@Zech414

will this work fine with 8x3mm magnets? I don't have 8x2 but have a lot of 8x3mm

@user_3604703479

Boosted

super cool, would you be able to build a block with a 10* angle?

@ilmanu

I think there is a patent pending on the design...

@Burg871619

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

great print. assembly was a breeze and sharpened the bigger kitchen knives well. small knives are a bit more difficult!!!

@FireMedic541

Boosted

Nice project

@user_969475866

Boosted

Hello, just a small boost to encourage you, Christophe

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.