Firecracker Launcher Stand
Print Profile(2)
Description
Firecracker Launcher
Hardware List:
1.Handwheel: M8 internal thread
2.M8 wing nut
3.M8*30 wing screw
4.Two M8*65 hex bolts
One M8*80 hex bolt
5.8mm diameter stainless steel rod, one meter long, cut into two 50cm pieces, bonded with AB adhesive
6.Launcher steel pipe outer diameter ≤50mm, an inner diameter of 40mm and outer diameter of 50mm is recommended, pipe length 0.5 meters, the bottom of the pipe is sealed with an 8mm thick steel plate, using either argon arc welding or electric welding,
An M10*100 bolt is welded to the steel plate. Find a steel plate to serve as a base; a heavy one is preferable. The bolt, nut, and bushing are welded to the base plate, with an M10 nut welded to the bushing. Thus, the launch tube can be fastened to the nut.
Boost Me (for free)
If you like it, please boost me, thank you!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)