Stitch in Energy Saving Mode HueForge
Print Profile(1)
Description
Project: STITCH LAZY STL.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 140x140mm in size
You may print at higher layer heights below the Min Depth of 0.8mm
The Max Depth is 2.2mm and the Actual Depth is 1.9mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Matte Ivory White Transmission Distance: 3.5
PLA+ Sunlu Blue Grey Transmission Distance: 3
PLA BambuLab Basic Red Transmission Distance: 4
Boost Me (for free)
I this this is an amazing print in just four colors! It was fun to make! Please consider buying me a coffee or just sending a boost! :)
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Ivory White
At layer #12 (1.04mm) swap to Black
At layer #14 (1.2mm) swap to Blue Grey
At layer #16 (1.36mm) swap to Ivory White
At layer #17 (1.44mm) swap to Red
At layer #18 (1.52mm) swap to Ivory White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)