Revopoint rotating table 125mm to 200mm adapter - Free 3D Print Model

Search models, users, collections, and posts

TheHarmory

Hobby & DIY>Electronics

IP Report

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 3 walls, 15% infill

Designer

1.9 h

1 plate

4.7(15)

LARGER Tolerance Version 0.2mm layer, 3 walls, 15% infill

Designer

2 h

1 plate

5.0(5)

Open in Bambu Studio

Boost

160

Released

Description

I ran into the “issue” that the marker plate that came with my Revopoint is larger (200mm diamter) then the rotating table (125mm diameter).

To solve this, I created this adapater, which you can place on the rotating table.

Update 10-1-2024: I have added a version with a sligtly higher (1.5mm) tolerance on the inside ring due to feedback from a user that his print did not fit, which could be caused by using another brand of filament (flow settings).

Side-note: the original model works without issues for me using Bambu Lab Basic PLA.

Comment & Rating (42)

@3Dingo

Print Profile

0.2mm layer, 3 walls, 15% infill

I’m sorry for this low rating, but the model quality isn’t good. The inside of the “ring” has no tolerance and the sectors don’t allow the insertion of the turntable.

(Edited)

The profile uploader has replied

@TheHarmory

Hello, thank you for the comment. and if it does not work I can fully understand the low rating. That being said, for me it worked without any issues (as the pictures show). The fit is tight, but it should be to make sure the platform will wiggle/or be loose (and not rotate). I printed this with Bambu Lab Basic PLA, can you please let me know which filament and printer you used? Maybe I can do some test to optimize the tolerance. Regarding the quality: I used TinkerCad to create the design, which has a limited number of edges. due to this a round object has some edges instead of it being fully round. For me, this cause no issues at all though.

(Edited)

@3Dingo

Replying to @TheHarmory :

I printed with Eryone white PLA. I think if you could export it in .step format to solve some issues about the inside ring..maybe add 0.1mm offset could help..

@TheHarmory

Replying to @3Dingo :

I have added a new version with a slightly larger inner diameter (1.5mm) hopefully this will solve the issue.

@_aron_

Boosted

Print Profile

0.2mm layer, 3 walls, 15% infill

Awesome!

The profile uploader has replied

@TheHarmory

super happy to hear you like it!!

@BamBam

Print Profile

0.2mm layer, 3 walls, 15% infill

exactly what was needed! used glue dots to hold the sheet on the base.

The profile uploader has replied

@TheHarmory

awesome!!! thank you for sharing!

@Kirbyrawr

Print Profile

0.2mm layer, 3 walls, 15% infill

I needed to sand it a bit but other than that it was totally fine, use the latest profile i guess it fix the issue.

(Edited)

The profile uploader has replied

@TheHarmory

thank you for the feedback and pictures, truly appreciated!

(Edited)

@alby696

Print Profile

0.2mm layer, 3 walls, 15% infill

top

@CYBR3D

Print Profile

0.2mm layer, 3 walls, 15% infill

Thank you for sharing.

The profile uploader has replied

@TheHarmory

thanks!

@GroovyAlpaca

Print Profile

0.2mm layer, 3 walls, 15% infill

Didn't quite fit. The model was uploaded as an STL, and the circle approximation was too rough. A finer detailed STL, or even better a STEP file, would likely fix the issue.

The profile uploader has replied

@TheHarmory

Hello, thank you for the review and sorry that your print didn’t fit. Just to be sure: did you also try the design with a little more clearance? For me personally the original design worked without any issues when using Bambu Lab PLA.

@mvitella

Print Profile

0.2mm layer, 3 walls, 15% infill

simple print, solves a problem.

The profile uploader has replied

@TheHarmory

thanks for liking it!!

@zipert

Boosted

Print Profile

0.2mm layer, 3 walls, 15% infill

top

The profile uploader has replied

@TheHarmory

thank you!

@richkrusell

Print Profile

0.2mm layer, 3 walls, 15% infill

Perfect fit. Thank you!

The profile uploader has replied

@TheHarmory

Thank you!

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.