justinharker17

cover

Dr Sawyer Print 3.jpg

Sawyer Print 2.jpg

Sawyer Print 1.jpg

plate_1.png

plate_2.png

2025-04-01_fe33942353b33.jpg

<h3>Print Profile Instructions</h3>This print consists of two plates.<h4>Plate 2 (Face – Print First)</h4><ul><li>Layer Height: 0.12 mm</li><li>Infill: 100%</li><li>Filament Color Changes: At layers 4, 7, 9, and 11</li></ul><h4>Plate 1 (Head – Print Second)</h4><ul><li>Layer Height: 0.2 mm</li><li>Infill: 15%</li><li>Printing Instructions:<ul><li>The print will pause at layer 28.</li><li>When paused, place the printed face from Plate 2 face-down in the center.</li><li>Resume printing—the face will be enclosed in the head.</li><li>Supports: Only use the painted supports on the bottom; no additional supports are needed.</li></ul></li></ul>For best results, use colors similar to the ones I used, but you can get creative with the color changes. The print is already set up for filament swaps.&nbsp;

0.2mm layer, 2 walls, 15% infill

&#34;The Doctor&#34; from Poppy Playtime, designed for a unique two-part print. The face, created in Hueforge, is printed separately with fine detail and embedded seamlessly into the head during the main print. The design requires minimal supports, with color changes set up to enhance the final look. While using similar colors will achieve the intended effect, there&#39;s room for creativity in customization.&nbsp;Let me know if you have questions or issues.

"The Doctor" Creepy Head – Poppy Playtime

ASIA

Print Profile(1)

Description

Comment & Rating (26)

License

Related Models