Designer uploaded wrong file but fixed the issue. haven’t had need to reprint but figured it was worth or a quality rating bump

The Ugly Dm

0.12mm layer, 4 walls, 15% infill

I have updated the spacers to fix this issue, I design the extensions to be a semi permeant addition to the legs for stability, they should be difficult to put it 

Conner Kierstead

Great thanks!  I'll try out the updated model!

The riser legs and leg extensions in the 3mf file should now match. I recently updated the individual files but forgot to update the 3mf file. Thanks for the feedback, and I'm sorry for the mistake.

Ich bin sehr zufrieden mit diesen 3D Druck. Die Füße habe ich mit TPU gedruckt, damit die dann auf den Laminatboden nicht hin und her rutschen. Ich bin erstaunt wie passgenau diese ineinander gesteckt werden konnten, wodurch kein Kleber benötigt wird. 
Vielen Dank dafür 🫶

I am very satisfied with this 3D print I printed the feet with TPU so they would not slide on the laminate floor I am amazed how precisely they fit together meaning no glue is needed Many thanks for this 🫶

native

Schade nur, dass es nicht noch flachere Versionen von den Füßen gibt, welche man dann mit TPU drucken kann. 

It's a shame there aren't even flatter versions of the feet that can be printed with TPU

They were great. Printed smooth. I used PETG Black to print and they came out amazing. Very strong.

TheJuanandOnly1

Functionally, these are rock solid.  However, as previous posters have indicated, the angle of at least the 3" extensions is still at a slightly different angle, making this print aesthetically unappealing.  

JRGLTD

Millertyme84

Works great, I add rubber feet so it doesn't slid.

BoomBoxDaddy

amazing used it for my shoe box I made, very strong

Rxide

hibari

printed smooth. I used them to prop up my poor man’s drying box. 

cover

6_7a25e55a-dab9-408d-a5df-6e9fdf82871c.jpg

5_c50c7a19-e8ed-4933-a611-285319ba2a89.jpg

4_76c00572-ca90-42aa-bcb8-4e1c573c32fb.jpg

3_6597d06b-f23b-472f-bef3-66133502a64a.jpg

2_f6398f49-eaeb-4ed3-bc0c-8e9c621103ba.jpg

Legs 

plate_1.png

1 in Leg Extensions 

plate_2.png

2 in Leg Extensions 

plate_3.png

3 in Leg Extensions 

plate_4.png

1_389b1951-dbb9-402d-bee4-07a57b8731c8.webp

No special settings, the parts are very simple.&nbsp;Happy printing!

Legs 2

plate_5.png

0526251146a[1].jpg

Simple set of legs for any self-project with 1-inch to 3-inch extension legs. Note the leg extensions are made to press fit and not be removed for stability. Raw Fusion 360 Files included. Screw holes are made of #8 (US not Metric) screws with 82-degree countersink.

Print Profile(2)

Description

Comment & Rating (53)

License

Related Models

Legs for Self or Monitor Riser

Print Profile(2)

Description

Comment & Rating (53)

License

Related Models