Kid Crocs-Style Shoes | Sizes 9–13 | One Plate TPU

I designed these kids' shoes to fit US children's size 11 with standard (Medium) width, which fits my 4- and 5-year-old girls. 

I drew them from scratch to fit an accurate child's foot scan and added some arch support. I also gave them a sleeker look which maybe some people might like. 

They use holes of the same size as Crocs, so they should be compatible with standard Crocs Jibbitz. 

Assembly Notes:

1. Pop the female top hat on the inside of the shoe holes, then strap on the outside, then use a small flathead screwdriver to tighten the male screw from the outside. 
2. I recommend you place a small dot of super glue inside the female end of the strap tophat when assembling to prevent the screw from backing out. 

These should be printed with TPU, I used 95A, which seems fine, but I wouldn't go any stiffer than that. 

They take about 4.5 hrs to print with a high-speed TPU. 

You might need to use a scalpel/razor blade to remove the small amount of support material used. 

The strap fixings are recessed to have a flush internal surface. 

The provided print profile has manual-painted supports and seams to avoid internal seams. I've scaled it for sizes 9-13. Just choose the appropriate plate. 

Special thanks to my 5-year-old for her detailed, constructive feedback on my first two versions!

Sizing notes:

You could try scaling just the shoes in the X direction only if you need to widen them (e.g. 115% for Wide, 125% for Extra Wide):

I hope you enjoy!