Search models, users, collections, and posts
Corncob TV Logo
IP Report
Print Profile(2)
Magnet/Thick Version
Designer
47 min
1 plate
Thin Version
Designer
46 min
1 plate
Open in Bambu Studio
Boost
19
52
1
2
12
4
Released
Bill of Materials
Description
The guys at Spectrum think I'm just some dumb hick!
Support Corncob TV now by printing your very own Corncob TV logo and proudly display the network that brought us Coffin Flop!
This listing includes two versions: a thin version for light applications and a thicker version with a resizable magnet slot so you can slap it on your fridge or toolbox.
Print Details | Thick Version | Thin Version |
|---|---|---|
Print Time | 47m | 46m |
Filament Usage | 16.03g | 8.25g |
Magnet Slot | 8x3mm magnet slot, resizable | No |
Settings | 100% | |
Layer Height | 0.08mm (Base: 0.2mm) | 0.08mm (Base: 0.16mm) |
Fans | Off (crack lid/door or turn fans on for enclosed printers) | |
🛑 Warning: My Hueforge settings disable all fans! Make sure your printer isn’t fully enclosed (keep the door/top cracked) or turn the fans back on to prevent overheating.
If resizing do NOT change the Z scale as this will break the color transitions
Color & Layer Swap Details
Color (TD) | Thick Version (Layer & Height) | Thin Version (Layer & Height) |
|---|---|---|
Ivory White (3.5) | Start | Start |
Indigo Purple (1.7) | #44 (3.64mm) | #6 (0.56mm) |
Maroon Red (2.0) | #47 (3.88mm) | #9 (0.8mm) |
Sky Blue (1.7) | #50 (4.12mm) | #12 (1.04mm) |
Marine Blue (1.0) | #53 (4.36mm) | #15 (1.28mm) |
Charcoal (0.6) | #56 (4.6mm) | #18 (1.52mm) |
Tell Spectrum NO
Boost Me (for free)
I'm still new to sharing my work, hope you enjoy this one! A like, rating, or boost would mean a lot. Let me know if you need any help!
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (1)