Stitch - Superman Painting Hueforge
Print Profile(1)
Description
Project: STITCH SUPERMAN STL.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 140x140mm in size
You may print at higher layer heights below the Min Depth of 0.88mm
The Max Depth is 2.3mm and the Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Matte Marine Blue Transmission Distance: 0.5
PLA+ Sunlu Blue Grey Transmission Distance: 3
PLA BambuLab Matte Dark Red Transmission Distance: 1.5
PLA+ Sunlu Pure Yellow Transmission Distance: 5
PLA+ Sunlu White Transmission Distance: 5
Boost Me (for free)
Please consider sending me a boost! :) Thank you!
This print uses 6 unique filaments
Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Marine Blue
At layer #12 (1.04mm) swap to Blue Grey
At layer #16 (1.36mm) swap to Dark Red
**Pause during red
Change Black to yellow
Change Marine Blue to White
At layer #19 (1.6mm) swap to Pure Yellow
At layer #21 (1.76mm) swap to White for the rest.
After my print would recommend using a matte white with a lower TD value such as PLA BambuLab Matte Ivory White Transmission Distance: 3.5
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)