Solo Leveling Kiba
Print Profile(1)
Description
Boost Me (for free)
Boost this model if you liked it!
Do not modify the height of this design.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 141.5x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.1mm and the Actual Depth is 2mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA+ Sunlu Sky Blue Transmission Distance: 8.2
PLA BambuLab Matte Ice Blue Transmission Distance: 3.5
PLA BambuLab Basic Red Transmission Distance: 4
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Sky Blue
At layer #13 (1.12mm) swap to Ice Blue
At layer #18 (1.52mm) swap to Black
At layer #19 (1.6mm) swap to Red for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)