Small Pet Cage Ledge/Platform
Print Profile(1)
Bill of Materials
- Flat Washer x 2: 6mmDiameter
- Nut x 2:
- WingNuts x 2:
Description
I printed this in ELEG00 rapid Petg, please keep this in mind when using my print profile.
Bolt holes are to be inserted from the inside, will fit a 1/4" x 1" hex bolt perfectly. The thread hole is 7mm so anything larger than that can be used to hold the ledge in place.
For my metric users, the bolt i used was an 11mm diameter hexnut(Diameter of the actual hexagon) the thread has a diameter of 6.15mm if converted.
If you run into any trouble with this print, please reach out to me first before rating the profile and I can assist with the print issue.
This print has been optimized in a way that does not require supports if printed in the orientation on the designer 3mf
I will list what i believe will not be a perfect fit but will work in the maker supply links below if you do not feel like making a trip to menards, homedepot, or lowes.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (11)