FNT adapter for plates holder BLV style Raisers

Hello Makers! 

Discover the full FNT buildplates holder family here and explore all the ways you can build your perfect setup.

The FNT family includes:
– AMS plates holders for 4, 6, or 8 build plates
– “Stack” or standalone mountable holders for 4 or 8 plates
– customizable plate logos
– TPU feet
– adapters for AMS Raisers

FNT adapter for plates holder BLV style Raisers

Get the most out of your AMS Raiser!

Use the adapter that allows you to use the FNT plates holder in your AMS Raiser.

The adapter is compatible with BLV-style AMS Raisers – designed for easy placement of the AMS unit.

Installation is quick and easy.

Simply align the adapter with your existing AMS plates holder and secure it using M4 screws and nuts.
Use the 4 spare mounting holes on your AMS Raiser for attachment.
The screws should be about 5 mm longer than the ones used for mounting the AMS plates holder.

Example: If the holder requires 16 mm screws, use 20 mm screws for the adapter. If you're using 30 mm screws for the holder, you'll need 35 mm for the adapter.

Note: Do not use glue or adhesive tape to secure the adapter. Vibrations from the printer may cause the bond to fail over time.

This adapter was created based on an idea by maker Zhak, with special thanks for testing and providing photos.